Device Update(Firmware Update)
You can update the firmware in the following three ways:
In the following cases, please connect Android Auto once:
First purchase
After updating the product’s firmware
After resetting the device from the app’s settings menu
Connecting the APP and Device
To connect the APP and device, refer to the device connection page.
1. APP Latest Version Update
1-1. Device Update Menu
Select the [Device Update] menu on the main screen.
1-2. Device Update
Select the 'Device Update' button at the bottom.
1-3. Wait for Update to Complete
Wait until the update is complete. AutoPro X will restart afterward. (Do not power off the device or close the app until the update is complete to avoid serious issues.)
1-4. Check Firmware Version
Once the update is complete, check the vehicle to confirm that it has been updated to the latest version. If the version is not the latest, the update has failed. You can retry the update through the APP or attempt the update via a web browser (link).
2. APP Previous Version Update
2-1. Select Version
Select the required version and press [Download Firmware for Selected Version].
2-2. Wait for Update to Complete
Wait until the update is complete. AutoPro X will restart afterward. (Do not power off the device or close the app until the update is complete to avoid serious issues.)
3. Web Browser Update
3-1. AutoPro X Mode
Connect to the vehicle, then select AutoPro X mode.
3-2. Connect via Wi-Fi Direct
Swipe down from the top of your phone screen to enter the settings menu. Long-press the Wi-Fi button.
In the Wi-Fi popup, select 'Advanced Settings.'
In the detailed Wi-Fi settings, press the 'More' button in the upper right corner. Select 'Wi-Fi Direct' from the popup.
In the Wi-Fi Direct list, find and select the Bluetooth name to connect.
Once connected, the screen will blink twice, confirming the connection.
3-3. Access 192.168.2.1
Open your preferred web browser (e.g., Samsung Browser, Chrome, Naver) and enter '192.168.2.1' in the address bar.
3-4. Update
The update screen will appear. (If the update screen does not appear, the connection may not have been successful.) Select the 'Check for updates' button to start the update.
Once the update starts, the screen will display Checking... followed by Upgrading... Do not disconnect the cable or close the browser until the device restarts automatically.
3-5. Update Complete
If the update is successful, the new version and a success message will appear.
If the update fails, the previous version and a failure message will appear. However, even if the failure message appears, if the vehicle screen displays the latest version (vX.X.X), the update has succeeded.
Last updated